Skip to content

GitLab

Last edited by Yingbin Li
Page history
This is an old version of this page. You can view the most recent version or browse the history.

RELEASENOTE_TAMUL

AnW_BT_SRV

AnW Bluetooth Service API, offered two sorts of releases

  1. APP Release (sta5_btsrv_sdk_*) : executable BTDemo, launcher btsrv_client.sh, essentails libraries (.so), and App configures (.xml)
  2. SDK Release (sta5_btsrv_sdk_*) : open source with AnWBTServiceDemo.cpp, imported essentials libraries (.so), header (anwbtservice.h), and App configures (.xml)

RELEASE NOTE

20220429 TAG:1.0.2.7
1.Customer release

20220425 TAG:1.0.1.44.sony.demo
1.fix: TAMUL No audio output while toggle output device to "BT" from mobile
2.known & reopen : 0002015: TAMUL_07 outgoing call number is no info return

20220425 TAG:1.0.1.42.sony.demo
1.fix 0002009: TAMUL_01 Rapid connections has fail rate;
2.fix 0002010: TAMUL_02 PBAP download has fail rate 3.fix 0002013: TAMUL_05 API PBAP_INFO is failed return, when to phonebook transfer;
4.fix 0002015: TAMUL_07 outgoing call number is no info return;
5.fix 0002016: TAMUL_08 Rapidly Play/Pause switching, cause media info update delay update;
6.fix 0002017: TAMUL_09 The media information update is not regular;

20220412 TAG:1.0.1.40.sony.demo
1、modify HFP Audio Transfer;(issue6)
2、add telephone number type in struct AnWBTService_PBAP_TELEPHONE_DATA_S;(issue3)
3、fix issue "Part of name is cut off in the phonebook";(issue4)

20220406 TAG:1.0.1.38.sony.demo
1、modify the crash issue of AnWBTSRV_SetScanMode;
2、fix the issue of pair device failed;

20220401 TAG:1.0.1.37.sony.demo

1.add "song_id3_interval_ms" in btmonitor-config.xml, default 500ms;
2.Fix HFP 20sec delay issue. root course is SOC audio PCM is customized as slave mode by SI vendor.

[known issue] id3 issue by some phone brand

20220330 TAG:1.0.1.28

1.Add member pairingMethodSupported in struct AnWBTService_LocalDevInfo_S;
2.Modify functions: AnWBTSRV_GetLocalDevInfo; AnWBTSRV_GetAllPairedDeviceInfo Snipaste_2022-03-30_13-00-12

20220318 TAG:1.0.1.27

  1. modify demo add hfp audio flow

20220318 TAG:1.0.1.26

  1. Provide AnWBTSRV_HFP_Enable_Audio_Flow function

20220317 TAG:1.0.1.24

  1. Change CFG_HFPAG_PRESENT to 0.

20220315 TAG:1.0.1.23

  1. Added HFP audio wrapper implementation for Tamul platform.
  2. Enable I2S setting in anwbt.h.

20220303 TAG:1.0.1.22

  1. Fixed Marvell DSPMgr NBS mode did not working.
  2. Fixed DSPMgr flow was disabled in SDK layer.

20220301 TAG:1.0.1.21

  • Add: workaround.During the phone call, run following commands to establish audio path.

20220223 TAG:1.0.1.20

  • Add: "AnWBTSRV_SPP_GetInformation", to get get CP & AA spp uuid information
  • Clear Log

20220223 TAG:1.0.1.18

  • patch audio sound config.

20220222 TAG:1.0.1.10

  • RAT pass : iPhone/Android + bi-direction connecting. HFP/A2DP/AVRCP/CA/BR

20220221 TAG:1.0.1.8

  1. add AVRCP_BR, AVRCP_CA profile support
  2. add menu test function of "CA", "BT" ..

20220214 TAG:1.0.0.6

  1. add AVRCP, A2DP profile support
  2. add menu test function of "A2DP", "AVRCP" ..

20220128 TAG:1.0.0.1

  1. [FUNC]supports pbap downloading & data callback
  2. [DEMO]update service demo
  3. [DOC]update SDK API Document

20220128 TAG:1.0.0.1

  1. [FUNC]supports pbap downloading & data callback
  2. [DEMO]update service demo
  3. [DOC]update SDK API Document

20220121 TAG:0.0.03

  1. [FUNC]supports android auto connect & write data to android
  2. [FUNC]Add some functions, For details, refer to anwbtservice.h

20220118 TAG:TAMUL_BT_V2

  1. [FUNC]supports iphone carplay connect & write carplay data to iphone

20220117 TAG:TAMUL_BT_V1

  1. [FUNC] supports basic BT pair & connect

USAGE

  1. Support HFP, A2DP, AVRCP, PBAP, .. AnW BT stack
  2. Support Device Search & Pair, Call, Phonebook, Music, ...
  3. If you want to use HFP, provide workaround.During the phone call, run following commands to establish audio path.
arecord -Dhw:0,1 -c2 -r16000 -fS16_LE | aplay -Ddefault -c2 -r8000 -fS16_LE
arecord -Ddefault -c2 -r8000 -fS16_LE | aplay -Dhw:0,1 -c2 -r8000 -fS16_LE

Pre-Requirement

Modify combo module init script /etc/init.d/ubloxinit.sh

echo "[DDMISO] UBLOX Driver"
modprobe jody-w2-sdiouart
ifconfig uap0 192.168.1.10
hostapd /etc/ublox/hostapd.conf -B
udhcpd /etc/ublox/udhcpd.conf
ifconfig uap0 up
wpa_supplicant -B -D nl80211 -i mlan0 -c /etc/ublox/wpa_supplicant.conf
#modprobe jody-w2-sdiouart-bt
#hciattach /dev/ttyAMA1 any 3000000 flow
#hciconfig -a hci0 up
#hciconfig -a hci0
udhcpc -i mlan0

Run App on targets (tamul_btsrv_app.zip)

  1. unzip
  2. Copy results folder "/build/btsrv" to target "/home/btsrv"
  3. go to target, in terminal entering /btsrv folder
  4. run btsrv_client.sh to launch BTDemo demo app and following the menu commands or
>./btsrv_client.sh

Install

Please select the function to test:
    1. Install AnWBTService Sdk
    2. Start btsrv
    3. Stop btsrv
    99. Exit btsrv Client.
 >1

then audio (asound.conf) & App Settings will be copied install to system folder (e.g. /etc & /etc/anwbtservice)

install_btsrv /home/root/btsrv
bt service install successfully.
AnWBTService Sdk install successfully root path:  /home/root/btsrv

NOTICE!! The system is required to power off (hard reset) for alsa driver's correct reload.

structure(tamul_btsrv_app-.zip)

.
└── btsrv
    ├── BTDemo (sample program)
    ├── btsrv_client.sh (launcher for BTDemo) 
    └── etc
        └──anwbtservice
             ├── \*.xml, \*.cfg (app settings)  
             └── lib   
                  └── *.so (essentials libraries)

Customize on SDK (tamul_btsrv_sdk.zip)

  1. unzip
  2. in terminal entering ./anwbtsrv_sdk/Demo folder
  3. setup tool-chain by command line (source ...) or edit in ./anwbtsrv_sdk/Demo/build_demo.sh
  4. run make or build_demo.sh
> cd ./build/anwbtsrv_sdk/Demo
> source /opt/poky-tamul/2.5.1/environment-setup-cortexa9hf-neon-poky-linux-gnueabi
> make
or 
>./build_demo.sh

then, result is collected in ./Demo/btsrv

structure(tamul_btsrv_sdk.zip)

.
└── Demo
    ├── AnWBTServiceDemo.cpp (examples to use anwbtservice)
    ├── build_demo.sh (build script, call to make)
    ├── makefile (makefile for BTDemo)    
    ├── btsrv_client.sh (launcher for BTDemo) 
    ├── etc
    │   └──anwbtservice
    │        ├── \*.xml, \*.cfg (app settings)  
    │        └── lib   
    │             └── *.so (essentials libraries)
    ├── import (anwbtservice)
    │   ├── anwbtservice.h (service api header)
    │   └── \*.so (include libraries)
    └── btsrv (ouput for produced, e.g. BTDemo)