RELEASENOTE_TAMUL.md

 # AnW_BT_SRV
-AnW Bluetooth Service API, offered two sorts of releases 
+
+AnW Bluetooth Service API, offered two sorts of releases
+
 1. [APP Release (btsrv)](#AppRelease): executable **BTDemo**, launcher **btsrv_client.sh**, essentails libraries (**.so**), and App configures (**.xml**)
 2. [SDK Release (anwbtsrv_sdk)](#SDKRelease): open source with **AnWBTServiceDemo.cpp**, imported essentials libraries (**.so**), header (**anwbtservice.h**), and App configures (**.xml**)
 
 # RELEASE NOTE
+
 20220118 [TAG:TAMUL_BT_V2](http://192.168.1.51:8088/delly.chen/anw_bt_srv/-/tags/TAMUL_BT_V2)
- 1. [FUNC]supports iphone carplay connect & write carplay data to iphone  
 
-20220117 [TAG:TAMUL_BT_V1](http://192.168.1.51:8088/delly.chen/anw_bt_srv/-/tags/TAMUL_BT_V1)  
- 1. [FUNC] supports basic BT pair & connect
+1. \[FUNC\]supports iphone carplay connect & write carplay data to iphone
 
-<div style="page-break-after: always;"></div>
+20220117 [TAG:TAMUL_BT_V1](http://192.168.1.51:8088/delly.chen/anw_bt_srv/-/tags/TAMUL_BT_V1)
+
+1. \[FUNC\] supports basic BT pair & connect
 
 # USAGE
+
 1. Support HFP, A2DP, AVRCP, PBAP, .. AnW BT stack
 2. Support Device Serarch & Pair, Call, Phonebook, Music, ...
 
 ## Pre-Requirement
-Modify combo module init script **/etc/init.d/ubloxinit.sh**              
-```
+
+Modify combo module init script **/etc/init.d/ubloxinit.sh**
+
+```plaintext
 echo "[DDMISO] UBLOX Driver"
 modprobe jody-w2-sdiouart
 ifconfig uap0 192.168.1.10
@@ -33,18 +39,21 @@ wpa_supplicant -B -D nl80211 -i mlan0 -c /etc/ublox/wpa_supplicant.conf
 udhcpc -i mlan0
 ```
 
-## Run App on targets (tamul_btsrv-.zip) <a name="AppRelease"></a>
+## Run App on targets (tamul_btsrv-.zip)
+
 1. unzip
 2. Copy results folder /build/btsrv to target /home/btsrv
 3. go to target, in terminal entering /btsrv folder
 4. run btsrv_client.sh to launch BTDemo demo app and following the menu commands or
-```
+
+```plaintext
 > export LD_LIBRARY_PATH="/home/btsrv"
 >./BTDemo
 ```
 
 ### Set Local Device Name
-```
+
+```plaintext
 ================bluetooth menu=================
 1.EXIT
 2.BTPowerOn
@@ -60,7 +69,8 @@ udhcpc -i mlan0
 ```
 
 ### Power On For BT INIT
-```
+
+```plaintext
 ================bluetooth menu=================
 1.EXIT
 2.BTPowerOn
@@ -71,12 +81,12 @@ udhcpc -i mlan0
 BTPowerOn
 ...
 ```
-Note: Looking for device name (e.g. TAMUL_MARVELL) from mobile, then pair the device with mobile
-When mobile shows connected succeed, turn off the BT button from mobile, then turn on the BT button from mobile again.
-At this time, mobile has paired storage with the device.
+
+Note: Looking for device name (e.g. TAMUL_MARVELL) from mobile, then pair the device with mobile When mobile shows connected succeed, turn off the BT button from mobile, then turn on the BT button from mobile again. At this time, mobile has paired storage with the device.
 
 ### Connect to SPP
-```
+
+```plaintext
 ================ BT Test Menu =================
 1. Exit                                     
 2. StartInquiry                             
@@ -90,15 +100,18 @@ At this time, mobile has paired storage with the device.
 > input connect addr(xx:xx:xx:xx:xx:xx): 11:e8:14:da:61:d4 (for example)
 ...
 ```
+
 Note: You can find mobile BT mac from **"Setting->General->About-> Bluetooth"**
 
-```
+```plaintext
 > input profile_mask: 0x00000100
 ```
+
 Note: Then, connected.
 
 ### Write SPP
-```
+
+```plaintext
 ================ BT Test Menu =================
 1. Exit                                     
 2. StartInquiry                             
@@ -110,42 +123,45 @@ Note: Then, connected.
 > input num: 10
 > input connect addr(xx:xx:xx:xx:xx:xx): 11:e8:14:da:61:d4 (for example)
 ```
+
 Note: You can find mobile BT mac from **"Setting->General->About-> Bluetooth"**
 
-```
+```plaintext
 >input IAP_data:**ff,55,2,0,ee,10** (for example)
 ```
+
 Note: Then, you can receive data back from IPHONE, check log printed:
-```
+
+```plaintext
 AnWBTService_SPP_DATA_IND_S sppData:
 [ff] [55] [2] [0] [ee] [10]**
 ```
 
-## Customize on SDK (tamul_release-.zip) <a name="SDKRelease"></a>
-- unzip
-- in terminal entering ./anwbtsrv_sdk/Demo folder
-- setup tool-chain by command line (source ...) or edit in ./anwbtsrv_sdk/Demo/build_demo.sh 
-- run make or build_demo.sh
-```
+## Customize on SDK (tamul_release-.zip)
+
+1. unzip
+2. in terminal entering ./anwbtsrv_sdk/Demo folder
+3. setup tool-chain by command line (source ...) or edit in ./anwbtsrv_sdk/Demo/build_demo.sh
+4. run make or build_demo.sh
+
+```plaintext
 > cd ./build/anwbtsrv_sdk/Demo
 > source /opt/poky-tamul/2.5.1/environment-setup-cortexa9hf-neon-poky-linux-gnueabi
 > make or ./build_demo.sh
 ```
-then, result is collected in **./Demo/btsrv**  
 
-<div style="page-break-after: always;"></div>
+then, result is collected in **./Demo/btsrv**
 
 # STRUCTURE (tamul_release-.zip)
-<pre>
+
 .
 └── Demo
     ├── AnWBTServiceDemo.cpp (examples to use anwbtservice)
     ├── build_demo.sh (build script, call to make)
     ├── makefile (makefile for BTDemo)    
     ├── btsrv_client.sh (launcher for BTDemo) 
-    ├── *.xml, *.cfg (app settings)            
+    ├── \*.xml, \*.cfg (app settings)            
     ├── import (anwbtservice)
     │   ├── anwbtservice.h (service api header)
-    │   └── *.so (essentials libraries)
+    │   └── \*.so (essentials libraries)
     └── btsrv (ouput for produced, e.g. BTDemo)
-</pre>